3-1/2 inch K Storm Choke

Tubing hangers form part of the primary well barrier while holding the tubing string in place. The tubing hanger is screwed to the top joint of tubing (or pup-joints as required for space out), and is landed in the casing flange (in compression or tension depending on the wellhead assembly) with the elastomeric seals preventing communication between the tubing and A-annulus. Our tubing hangers come in a variety of sizes and specifications for various wellhead manufacturers including Cameron, FMC, Stream-Flo, ABB, Vetco-Gray, and Barbour systems to name a few. We stock inventory from vintage systems, as well as modifying hangers for additional feed-throughs for control lines, electric feed-thru, or downhole fiber-optic as required.

Storm Choke® H safety valves are ambient-type, wireline retrievable valves that are normally closed and precharged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge, as a result of a rupture in the flowline or surface equipment, the dome pressure and valve spring are designed to close the valve, shutting in the well. The H valve is used in wells producing large volumes of abrasive fluids. Its large bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal (MTM) ball and seat is used as the primary closure mechanism. The H valve is ideal for protecting wells with declining bottomhole pressure because this valve is tubing pressure sensitive instead of velocity sensitive. To reopen, the valve pressure must be fully equalized either by applying pressure in the tubing from the surface or by running a prong to allow equalization from below. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells producing large volumes of abrasive fluids » Wells with declining bottomhole pressure » Wells with no provisions for surface-controlled valves Features » Large bore not restricted by a flow bean » MTM ball and seat » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

The MJS™ packer is a compact, high-performance, thermal packer system which offers an expansion joint and a casing packer in a single assembly. The MJS is a rotationally set, double-grip packer, speciically designed for use in steam injection, huff and puff or geothermal production wells, when a wide range of pressures from above or below are anticipated. Please note: Tubing weight and grade must be capable of applying minimum speciied setting torque to the packer. We can source from current stock or direct from the manufacturer.

MC (flapper-type) injection valves are used in injection wells to automatically shut-in the tubing string when injection stops or flow reverses. MC injection valves are spring-loaded, wireline-retrievable valves with large bores. The MC injection valves also feature sealing areas that are out of the direct flow path. These valves are designed to be held open by injection pressure for fluid passage. If injection flow becomes static or reverses for any reason, the spring and/or reverse flow causes the valves to close. These valves are designed to remain closed until pressure differential across the valves is equalized and injection is resumed. Applications » Injection wells Features » MC valves have sealing areas that are out of the direct flow path *information sourced from manufacturer

Enhancing Wireline Flexibility with HOCA Oil Tools B.V.'s Advanced Knuckle Joints In the demanding environments of oil and gas extraction, the adaptability and precision of downhole tools are paramount. At HOCA Oil Tools B.V., we specialize in providing state-of-the-art wireline solutions, including our wide range of Knuckle Joints, known for their exceptional flexibility and reliability. Our Knuckle Joints are designed to provide pivotal flexibility in the Wireline Tool String, facilitating angular movement between the tool string and the running or pulling tool, an essential feature for navigating complex downhole geometries. Six Key Benefits of HOCA's Wireline Knuckle Joints: Enhanced Flexibility: Our Knuckle Joints allow for angular movement, enabling the Wireline Tool String to navigate through deviated wellbores efficiently. Improved Tool Placement: By enabling better maneuverability, our Knuckle Joints facilitate precise tool placement, improving the success rates of downhole operations. Increased Operational Range: The added flexibility extends the operational range of wireline tools, allowing for more complex and challenging interventions. Robust Design: Constructed with high-quality materials, our Knuckle Joints withstand harsh downhole environments, ensuring longevity and reliability. Versatile Application: Suitable for a variety of downhole activities, our Knuckle Joints are essential for both standard operations and complex well interventions. Easy Integration: Available with both Threaded and QLS Connections, our Knuckle Joints seamlessly integrate into existing tool strings, enhancing operational efficiency. HOCA's Diverse Array of Wireline Knuckle Joints: Type ‘AO’ Knuckle Joints (Threaded Connection): These are available in sizes from 3/8” to 2 1/2”, designed for easy integration with various tool strings. They offer exceptional flexibility and strength, with sizes accommodating different operational needs, ensuring that tools can navigate wellbore paths effectively. Type ‘AD’ Knuckle Joints (QLS Connection): Catering to advanced operational requirements, these Knuckle Joints provide the same high-level flexibility with quick lock-and-seal connections for faster deployment and retrieval, available in sizes ranging from 1 1/2” to 2 1/2”. Rebco Type ‘AS’ Knuckle Joint (RQLS Connection): An addition to our lineup, offering enhanced swivel action and compatibility with a range of wireline tools, facilitating seamless downhole operations. Each of our Knuckle Joints is engineered with precision, incorporating features such as double fishing necks for increased adaptability and operational safety. The diverse sizes and connection types we offer ensure that there is a HOCA Knuckle Joint suitable for every downhole challenge. By choosing HOCA Oil Tools B.V. for your wireline operational needs, you are selecting a partner dedicated to innovation, quality, and customer service. Our Knuckle Joints represent just one aspect of our commitment to providing the oil and gas industry with tools that meet the highest standards of performance, reliability, and safety. Embrace the flexibility and efficiency of HOCA’s Wireline Knuckle Joints to enhance your downhole operations. Contact us today to learn more about how our tools can transform your well interventions and streamline your operational workflows

The Oil-Only Absorbent Pillow, represented by the OH-PI1212, emerges as a utilitarian solution. From the versatile material known as polypropylene, this unassuming pillow bears the capacity to redefine the efficiency and sustainability of liquid cleanup. Why is Polypropylene chosen as the material for use? Polypropylene is a preferred material for oil-based cleanup for several reasons, making it an ideal choice for products like the Oil-Only Absorbent Pillow. Hydrophobic Nature Polypropylene is inherently hydrophobic, meaning it repels water. This characteristic is crucial in oil-based cleanup scenarios where the goal is to selectively absorb oils while avoiding the absorption of water. The hydrophobic nature of polypropylene ensures that the material remains focused on its primary task—absorbing oil-based liquids. High Affinity for Oil Polypropylene has a high affinity for oil-based substances. When in contact with oils, polypropylene quickly absorbs and retains these liquids. This property enhances the efficiency of cleanup operations, allowing for the rapid containment and absorption of oil spills. Lightweight and Durable Polypropylene is a lightweight yet durable material. This is advantageous in cleanup products like absorbent pillows, as it ensures ease of handling and deployment while maintaining structural integrity during use. The lightweight nature makes these products practical and user-friendly in various industrial settings. Chemical Resistance Polypropylene is known for its chemical resistance, providing stability when exposed to a wide range of substances, including oils and hydrocarbons. This resistance ensures that the material remains effective and does not break down when encountering various oil-based liquids. Recyclability Polypropylene is recyclable, adding an environmentally conscious aspect to its use in oil-based cleanup products. The ability to recycle polypropylene helps reduce the overall environmental impact by promoting the responsible disposal and reuse of materials. Cost-Effectiveness Polypropylene is a cost-effective material, contributing to the affordability of products designed for oil-based cleanup. Inert Nature Polypropylene is inert, meaning it does not react with or alter the composition of the substances it meets. This inert nature is crucial in cleanup situations where the goal is containment and absorption without introducing additional complications or reactions. Where is the Oil-Only Absorbent Pillow typically used? • Industrial facilities • Marine environment • Construction sites • Oil refineries • Emergency response • Environmental cleanup projects • Agricultural operations • Transportation Technical Specifications Part Number: OH-PI1212 Product Type: Absorbent Pillow Fluids Absorbed: Oil Based Liquids Volume Absorbed per unit: 1.35 gal Colour/Pattern: White Outside Skin Material: Polyester Rope Along Length: No Volume Absorbed per pkg.: 6.7 gal Floating: Yes UV Resistant: No Size: 12” x 12” Filler Material: Polypropylene Filler Sock/Boom Profile: Square Flame Resistant: No Incinerable: Yes

KEY360 Inc offers a single integrated Business Management Platform comprising Business Intelligence, Project Management, Big Data & Analytics, ERP, Behaviour and Strategy Modification. - Over 140 Business and Project Management Systems on one platform available - Unique and extremely effective workflow engine - Remarkable “BIG DATA” and bulk transaction capability - Integrated Real Time reporting and dashboarding - Multi-company platform allows all project users to integrate seamlessly KEY Differentiators: - KEY360 Provides an exceptional opportunity for your organisation to attract new clients and build long terms relationships. - KEY360 is a Microsoft Gold Partner and Approved Microsoft Co-Sell Partner and can be purchased directly from the below online marketplaces: - Microsoft AppSource: KEY360 Capital Management Projects - Azure Marketplace: KEY360 Capital Management Projects - KEY360 is reputedly the most comprehensive and versatile Capital Project Management, Business Digitalization & Business Optimization solution available.

Introducing Safe-T-Whip™ Continuous HD-Short 7’ (SW-HD-04-S): Uncompromising Safety for Heavy Duty Short Restraint Applications At Safe-T-Whip & Restraints Inc., safety is our top priority. We are excited to introduce our latest innovation - the Safe-T-Whip™ Continuous HD-Short 7’. Specially designed for heavy-duty applications that require a shorter restraint, this safety whip offers unparalleled protection and reliability for pressurized pipe fittings in the oilfield. Unmatched Heavy Duty Design: Identified by its striking red color and accompanied by an orange tag, SW-HD-04-S Safe-T-Whip™ Continuous HD-Short 7’ is meticulously crafted from robust 3/4" 12-Strand HMPE fiber. This heavy-duty safety restraint is engineered for use on 3-inch 1502 hammer union pipelines up to an impressive 15,000psi or 4-inch iron up to 10,000psi. When you need a shorter restraint for heavy-duty applications, trust Safe-T-Whip™ Continuous HD-Short 7’ to deliver. Enhancing Safety with Continuous Restraints: The Safe-T-Whip™ Continuous HD-Short 7’ is an integral part of our safety restraint system, designed to contain uncontrolled movement on both sides of a pipe union during sudden and total failure. By creating a choke on either side of a potential rupture, it effectively reduces in-line flowline movement as well as lateral movement, mitigating dangerous impacts. Engineered for Maximum Protection: The Safe-T-Whip™ Continuous system offers end-to-end restraint of flowlines for all lengths of pipe sections, swivels, and joints. Each section is secured by both the upstream and downstream sections of the flowline, ensuring comprehensive protection in the event of failure. Proper evaluation of the piping system is crucial to ensure adequate anchoring both upstream and downstream, enhancing safety. Certified for Uncompromising Quality: Safety is paramount, and that's why all Safe-T-Whip™ Restraints and Anchors undergo rigorous testing and certification to meet the highest industry standards. Our commitment to quality ensures that you receive a safety restraint system you can trust. Versatility and Flexibility: The Safe-T-Whip™ Continuous HD-Short 7’ is designed for use on 2, 3, and 4-inch iron 1502 hammer union pipes, with recommended pressures ranging from 2,000psi to 15,000psi. Its versatility makes it ideal for various flowline configurations, ensuring superior protection for your heavy-duty operations. Enhanced Flowline Safety: Once installed correctly, the Safe-T-Whip™ Continuous HD-Short 7’ is designed to limit unsafe flowline movement throughout the entire linear series of a flowline. With Safe-T-Whip™ Continuous HD-Short 7’, you can rest assured that your heavy-duty operations are safeguarded from catastrophic failures. The Ultimate Heavy Duty Safety Restraint: SW-HD-04-S Safe-T-Whip™ Continuous HD-Short 7’ is the ultimate safety restraint for heavy-duty short applications. Keep your operations safe with Safe-T-Whip & Restraints Inc., your trusted partner in safety.

Storm Choke® K safety valves are ambient-type, wireline retrievable valves with the largest flow area of all direct controlled safety valves on the market. They are ideally suited for high-volume, low-pressure wells. These valves are normally closed and pre-charged with a set dome pressure. When the well flowing pressure drops below the predetermined dome-pressure charge because of a rupture in flowline or surface equipment, the dome pressure and main valve spring close the valve, shutting in the well below the earth’s surface. This valve contains a detent mechanism to provide a positive snap-action closure at the predetermined disaster rate of the valve. Its bore is not restricted by a flow bean. The valve is designed to resist pressure surges. A metal-to-metal poppet valve and seat comprise the valve’s primary closure mechanism. The K valve is ideal for protecting wells with declining bottomhole pressure. This valve closes in situations where a pressure decline would not activate a valve with a flow bean. To reopen the valve, the operator must fully equalize pressure either by applying pressure in the tubing from the surface or by an equalizing prong. The valve will reopen when the tubing pressure acting on the internal piston area overcomes the dome charge. Applications » Wells with declining bottomhole pressure » High-volume, low-pressure wells » Wells with no provisions for surface-controlled valves Features » Poppet closure » Large ports with capacity for high-volume wells » Designed to resist pressure surges *description excerpted from manufacturers catalogue.

Introducing Safe-T-Whip RD Anchor (SW-A-RD-01): Your Anchor for Unmatched Safety and Reliability Safety is our top priority at Safe-T-Whip & Restraints Inc., and we are thrilled to present our latest innovation - the SW-A-RD-01 Safe-T-Whip RD Anchor. This indispensable anchor is designed to provide robust restraint for flowline installations in the oilfield, ensuring the utmost safety for your team and equipment, even in the most demanding conditions. Unparalleled Design and Performance: Identified by its bright yellow color and yellow tag, SW-A-RD-01 is made from 1/2" 12-Strand HMPE fiber, making it a Regular Duty (RD) anchor ideal for use on 2-inch 1502 hammer union pipelines up to 5000psi, 3-inch iron up to 3000psi, or 4-inch iron up to 2000psi. When your operations require an anchor connection for flowline restraint, it is crucial to use a designated Safe-T-Whip™ Anchor, ensuring maximum safety and reliability. Revolutionary Modulus Synthetic Fiber: Safe-T-WhipTM harnesses the power of high modulus polyethylene (HMPE), also known as ultrahigh molecular weight polyethylene (UHMWPE). This synthetic fiber is as strong as steel-wire ropes, yet significantly lighter, making it easy to handle, store, and transport. With its resistance to pressure hose and immunity to corrosion, oil spills, and most chemicals, our anchor ropes are specifically engineered to thrive in the extreme drilling and fracking conditions of the Canadian oil patch. Chemical Immersion and Temperature Resilience: SW-A-RD-01 demonstrates exceptional strength retention after 6-month immersion in various chemicals, including sea water, hydraulic fluid, gasoline, hydrochloric acid, and more. Additionally, it operates efficiently within a wide temperature range from -65°C to +65°C. Our anchor ropes are chemically inert, ensuring they stand the test of time and remain reliable under the harshest conditions. Your Economic and Comprehensive Solution: Purchasing a Safe-T-WhipTM system offers numerous advantages for multiple and long-term projects. Owning your safety restraint system gives you control over your job sites and projects without any delays, while also allowing you the flexibility to rent or purchase additional components as your needs change. The durability and ease of storage of our system ensure a long-lasting investment that will protect your workforce and hardware for years to come. Full Certified Training and In-house Financing: When you choose Safe-T-Whip & Restraints Inc., you not only acquire top-notch safety equipment but also receive a full certified Safe-T-Whip training program on installation, maintenance, and storage. Our experts are available to support your team throughout any project, ensuring smooth assembly and disassembly. Additionally, we offer in-house financing on all new projects, making it easier than ever to acquire your complete safety restraint system. Global Shipping Made Easy: Thanks to the lightweight nature of our system, we can provide direct and economical shipping throughout Canada and the world. Rest assured that your Safe-T-Whip RD Anchor will reach you swiftly and securely, ready to deliver unbeatable safety on your worksites. Protect Your Worksite with Safe-T-Whip: Invest in the SW-A-RD-01 Safe-T-Whip RD Anchor and safeguard your worksite, hardware, and workforce while ensuring full compliance with work safety regulations. Trust Safe-T-Whip & Restraints Inc. for the ultimate safety solutions in the oilfield industry.

Multifunctional, with intelligent power management The MultiPlus is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive charge technology, and a high-speed AC transfer switch in a single compact enclosure. Next to these primary functions, the MultiPlus has several advanced features, as outlined below. Two AC Outputs The main output has no-break functionality. The MultiPlus takes over the supply to the connected loads in the event of a grid failure or when shore-/generator power is disconnected. This happens so fast (less than 20 milliseconds) that computers and other electronic equipment will continue to operate without disruption. The second output is live only when AC is available on the input of the MultiPlus. Loads that should not discharge the battery, like a water heater for example, can be connected to this output (second output available on models rated at 3kVA and more). Virtually unlimited power thanks to parallel operation Up to six Multis can operate in parallel to achieve higher power output. Six 24/3000/70 units, for example, provide 15kW / 18kVA output power with 420 Amps of charging capacity. Three phase capability In addition to parallel connection, three units can be configured for three-phase output. But that’s not all: with three strings of six parallel units a 45 kW / 54 kVA three phase inverter and 1260 A charger can be built. Split phase options Two units can be stacked to provide 120-0-120 V, and additional units can be paralleled up to a total of 6 units per phase, to supply up to 30 kW / 36 kVA of split phase power. Alternatively, a split phase AC source can be obtained by connecting our autotransformer (see data sheet on www.victronenergy.com) to a ‘European’ inverter programmed to supply 240 V / 60 Hz. PowerControl - Dealing with limited generator, shore side or grid power The MultiPlus is a very powerful battery charger. It will therefore draw a lot of current from the generator or shore side supply (nearly 20 A per 3 kVA MultiPlus at 120 VAC). With the Multi Control Panel a maximum generator or shore current can be set. The MultiPlus will then take account of other AC loads and use whatever is extra for charging, thus preventing the generator or shore supply from being overloaded. PowerAssist - Boosting the capacity of shore or generator power This feature takes the principle of PowerControl to a further dimension. It allows the MultiPlus to supplement the capacity of the alternative source. Where peak power is so often required only for a limited period, the MultiPlus will make sure that insufficient shore or generator power is immediately compensated for by power from the battery. When the load reduces, the spare power is used to recharge the battery. Four stage adaptive charger and dual bank battery charging The main output provides a powerful charge to the battery system by means of advanced ‘adaptive charge’ software. The software fine-tunes the three stage automatic process to suit the condition of the battery, and adds a fourth stage for long periods of float charging. The adaptive charge process is described in more detail on the Phoenix Charger datasheet and on our website, under Technical Information. In addition to this, the MultiPlus will charge a second battery using an independent trickle charge output intended for a main engine or generator starter battery. System configuring has never been easier After installation, the MultiPlus is ready to go. If settings have to be changed, this can be done in a matter of minutes with a DIP switch setting procedure. Even parallel and 3-phase operation can be programmed with DIP switches: no computer needed! Alternatively, VE.Net can be used instead of the DIP switches. And sophisticated software (VE.Bus Quick Configure and VE.Bus System Configurator) is available to configure several new, advanced, features. *information from manufacturer catalogue

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Looking for a reliable and high-quality retrievable bridge plug for your completion needs? Look no further than ID OilTools' QUP Plug System! Our QUP Plug System is specifically designed to provide pressure control or tubing anchoring in completions where nipple profiles are either damaged or not available. This means that our plug can be used in a variety of applications, including wellbore isolation, straddle systems, instrumentation suspension, artificial lift systems, orifice downhole chokes, downhole check valves, and pump open subs. The QUP plug can be easily conveyed to depth on standard electric line setting tools or on hydraulic setting tools for use with coiled tubing. Retrieval of the plug is just as easy, using a standard GS-pulling tool and standard retrieval procedures. Plus, our patented releasing mechanism makes it easy to fit a variety of equalizing or pump through-subs on the bottom of the plug. But the benefits of our QUP Plug System don't stop there! Our plug system boasts a number of additional features and capabilities, including a slip-lock design, equalizing assembly options, and elements built to NACE MR0175 specifications. Plus, our proprietary HSN and Fluoroelastomer elements ensure that our plug system can withstand even the harshest conditions, with a maximized thru bore for maximum production. So if you're in need of a reliable, high-quality retrievable bridge plug, look no further than ID OilTools' QUP Plug System. Contact us today to learn more!

A tricone bit is a mechanical drill bit located in the bottom hole assembly. The bit cuts away the surface of the rock being drilled through rotation and mechanical friction caused by the teeth of the bit. A tricone bit is a drill bit with a head that is divided into three main parts. Tricone bits are designed to take the energy of the rotating drill string and the supply of mud and to apply this force to deepen the well. The tricone bit consists of three rotating cones working inside each other and each with its own row of cutting teeth.

Lanai ROV - The Ultimate All-In-One Solution for Subsea Operations Everything You Need - Ready to Dive Right In Imagine having all the tools you need at your fingertips, without the hassle of assembling and configuring complex systems. Introducing the Lanai ROV, the epitome of simplicity and efficiency. Designed by ROV operators for operations, the Lanai ROV is here to revolutionize your subsea exploration. Simplicity Meets Capability At Poseidon Robotics, we understand that time is of the essence in the underwater world. The Lanai ROV comes fully assembled and ready to run straight out of the case, saving you valuable setup time. With a fully integrated console, tether reel, and factory-tested system, you can dive into your work without the need for a laptop. Engineered for Excellence Drawing upon decades of ROV operation experience and leveraging modern manufacturing techniques, we've created a remotely operated vehicle that sets new standards for capability and affordability. The Lanai ROV offers an unparalleled combination of features that will empower your missions. Pack More, Explore More The Lanai ROV's deck space and buoyancy cutouts offer ample room for a variety of payloads, including imaging sonar, scanning sonar, USBL, altimeter, CTD, UT, and Reach Alpha 5F manipulator. You won't need a tooling skid or extra buoyancy, maximizing your operational flexibility. Versatility at Your Fingertips Standard options such as the 125m tether/reel, console, and controller are just the beginning. With the Lanai ROV, you have the freedom to customize your setup with additional choices like the Newton grabber, waterproof transport cases, spare parts/tools, and more. Rest assured with our 2-year warranty - because your peace of mind is our priority. Unlock the Potential of Sonar Exploration With the Lanai ROV, discovering the underwater world has never been more accessible. The Sliding Aluminum Brackets are designed to securely hold a Cerulean Sonar ROVL (USBL), Blue Robotics Ping360 Sonar, DiveNET GPS (LBL), and many other sonars and beacons. Raise and lower the brackets effortlessly with an Allen Key to protect your valuable equipment from potential obstacles. The Power Behind the Performance Unleash the potential of the Lanai ROV with its impressive specifications: • Depth Rating: Dive confidently to 400m, exploring new depths and territories. • Compact and Lightweight: At just 13.0kg in air and dimensions of 559x356x305mm (LWH), the Lanai ROV is highly maneuverable and portable. • Payload Capacity: With a capacity of 2.1kg in freshwater, you can equip your Lanai ROV with a range of essential sensors and tools. • State-of-the-Art Thrusters: Experience precision movements with 4 lateral (35deg) and 4 vertical Blue Robotics T200 connectorized thrusters. • Superior Imaging: Capture the underwater beauty with a 1080 HD IP camera with tilt and four 1,500 Lumen lights for optimal visibility. The Console - Your Command Center Control your exploration effortlessly with the Mini Integrated Console. Boasting a 12in HD monitor (1,200NIT) and fully isolated output with GFCI, it houses an Intel PC with pre-configured software for seamless operations. Unleash the Exploration with Lanai ROV Take charge of your underwater missions with the Lanai ROV. Simplify your operations, maximize your payload options, and explore with confidence. Contact us today to embark on your journey with the Lanai ROV - The Power of Simplicity, Unleashed.

The FXE wireline-retrievable flapper valve, which is normally closed, is held open by hydraulic control pressure from the surface. The valve operates on a hydraulic piston principle. To open, hydraulic pressure slightly higher than the well pressure is applied to move the piston downward. This pressure unseats the secondary seat, allowing pressure to enter through equalizing ports. Then, as additional hydraulic pressure is applied to the piston, it continues downward movement, pushing the flapper open. The flapper hinge assembly is designed such that the force on the piston is not applied directly on the hinge pin. Upon loss of hydraulic pressure in the control line, the valve’s large spring serves to lift the hydrostatic head of the control fluid. The flapper spring is designed to close the valve when the piston moves up past the flapper. Opening Prong Nose Seal The FXE valve uses the valve housing as the downstop for the opening prong. This metal-to-metal (MTM) interface is designed to prevent flow from passing between the valve housing and the opening prong. The MTM interface isolates the flapper and seat from fluid flow while the valve is open. This design creates an MTM interface with the full force exerted by the hydraulic piston, minus the spring compression force, holding the two metal faces in contact. Radius of Curvature at Flow Entrance Halliburton conducted a study with various curvatures on the entrance to the valve. The study tested abrasive fluids flowing through different test subs and examined the resulting wear patterns. As a result, an optimum radius of curvature was determined and implemented on the valve housings of all wireline-retrievable safety valves. Applications » General production completions Features » Equalizing-type flapper closure » Solid construction flapper made from bar stock » Spherical radius seat on flapper improves seal reliability » Sealing and seating surfaces are out of the well production flow path when valve is in the open position *information referenced from supplier catalog.

Expert Safe-T-Whip Qualified Installers: Your Gateway to Safety and Efficiency At Safe-T-Whip & Restraints Inc., we not only offer top-of-the-line safety restraint systems but also a comprehensive service that ensures your worksite meets all safety standards. Renting or owning your own Safe-T-Whip system is a step towards enhanced safety, but qualified installation personnel are essential to ensure compliance with local safety codes. That's where our expert qualified installers come in to make a real difference. Your Safety, Our Priority: We understand the criticality of safety in the oilfield, and that's why we provide the option of sending our qualified installers to your site to perform the rig up and down. Their expertise and experience ensure that every aspect of the installation process meets the highest safety standards, giving you peace of mind that your workforce is protected. Empowering Your Crew: Alternatively, we can certify one of your own crew members to become proficient installers through our Safe-T-Whip certification process. We provide comprehensive training that equips them with the knowledge and skills needed to perform installations efficiently and effectively. Once trained, they'll be able to rig up and down the system confidently, ensuring maximum safety for your operations. Quick and Easy Installation: The Safe-T-Whip system is designed with simplicity and efficiency in mind. Whether our qualified installers handle the setup or your certified crew members take charge, you'll quickly discover just how quick and easy the installation process can be. Understanding the flow of the links and checking for complete link coverage becomes second nature with our training. Ensuring Your Safety: Your worksite's safety is at the core of our service. No matter which installation option you choose, we are here to help you every step of the way. Rest assured that with our qualified installers or your certified crew, your Safe-T-Whip system will be installed correctly, ensuring maximum protection for your team and equipment. Lightweight and User-Friendly: The entire Safe-T-Whip system is designed to be lightweight and user-friendly. Hauling and installing it require just a single person, enhancing convenience and making it a practical safety solution for your oilfield operations. Choose Safe-T-Whip & Restraints Inc. for Enhanced Safety: With Safe-T-Whip qualified installers, you gain access to a team of experts who prioritize your safety above all else. Contact us today and discover how we can make your worksite safer and more efficient. At Safe-T-Whip & Restraints Inc., your safety is our commitment.

Unlock Local Currency Access Anywhere with Dunbridge Financial's Personal Services Imagine traveling to a new country and seamlessly accessing the local currency as if you already had a local bank account. With Dunbridge Financial's Personal Services, this dream becomes a reality. We understand the importance of having local currency at your fingertips when you need it, and our innovative solutions are designed to make your financial experiences hassle-free and empowering. Access Local Currency Anywhere You Go Traveling to a new country is an adventure, but managing your finances in a foreign land can be a challenge. At Dunbridge Financial, we believe that you should have the freedom to access local currency effortlessly. Our Personal Services provide you with the tools you need to make your travel experiences smooth and enjoyable. Personal Services for Your Peace of Mind At Dunbridge Financial, we take pride in offering comprehensive Personal Services that cater to your specific financial needs. Here's why our customers choose us: 1. Live Rates with No Hidden Fees Transparency is at the heart of our services. When you choose Dunbridge Financial, you won't encounter any hidden fees. What you see is what you get - access our live exchange rates and be confident that you're getting the most value for your money. 2. Security is Our Priority Your financial security is paramount to us. We partner with payment service providers who adhere to ISO27001 compliance, ensuring that your funds and data are managed safely and securely. Enjoy peace of mind knowing that your financial transactions are in trustworthy hands. 3. Easy to Use, Easy to Save Managing your international transactions should be effortless. With Dunbridge Financial, it is as simple as it gets. Sending money to over 100 countries is just a few clicks away. Select your destination, choose the recipient, lock in your exchange rate, and you're done! Saving time and money has never been easier. Why Choose Dunbridge Financial? We are more than just a financial service provider - we are your reliable partner in managing your personal finances. When you choose Dunbridge Financial, you gain access to: • Cutting-edge technology for smooth and efficient transactions • Expert guidance from our dedicated team, ensuring your needs are met • Secure and compliant processes that prioritize your financial well-being Join Us Today and Empower Your Financial Freedom Don't let financial limitations hinder your travel experiences. Join Dunbridge Financial today and experience a world of ease, convenience, and security. Whether you need local currency while traveling or making international money transfers, we are here to make your financial journey a breeze. Empower your financial freedom with Dunbridge Financial. Sign up now and unlock a seamless, worry-free financial experience. Access local currency anywhere you go and embrace a world of limitless possibilities.

Deploying X-SPAN systems has never been easier! With a range of multi-stage explosive, electric line non-explosive or hydraulic setting tools available, our X-SPAN systems can be deployed quickly and efficiently in any well application. Our explosive setting tools can be initiated electrically, on e-line or slick line using a variety of compatible firing systems. For conventional tubing or coil tubing deployment requirements, several sizes of hydraulically operated setting tools are available to meet your specific needs. Our X-SPAN systems are not only easy to deploy, but they are also easy to remove. Simply mill off the sealing elements and your well is ready for the next application. We take pride in the reliability and quality of our X-SPAN systems, which have been proven many times with over 2900 successful installations completed with a 98% success rate when setting depth has been achieved. At ID OILTOOLS, we are committed to providing our customers with the highest quality and most reliable products on the market. Contact our Tech Services department today to learn more about our X-SPAN systems and how they can benefit your well application.

The WI retrievable injection valve is a high-performance, high-flow rate injection valve. High throughput is achieved by a unique valve configuration that minimizes turbulent and potentially erosive flow. Operation is not dependent on a specific flow rate, pressure, or setting depth, thus negating the need for adjustment over time. The valve incorporates a metal-to-metal valve and seat energized by the combination of an integral spring and well pressure acting from below. The WI injection valve can be deployed on a wireline lock or through-tubing pack-off device, providing flexibility not available with alternative injection valve systems. As a result of the simple design with fewer parts, redress and repair costs are considerably lower than those for other injection valve systems. Applications The WI injection valve is primarily used in water injection applications as an alternative to conventional tubing or wireline-set safety valves. The valve is also commonly used as a retrofit solution in water injectors in which a tubing to annulus leak has occurred. The valve can be deployed below the leak point to eliminate uncontrolled annulus pressure increases when the injection stops. Features » Compatible with all known lock systems » Dedicated designs to suit Halliburton EB0 intervention packers » Enhanced internal flow profile » Simple design and construction » Flow-loop testing performed to establish pressure drop versus pump rate *information referenced from supplier catalog.